Welcome to RAMOTOR
中文
English
Russian
0086-(0)29-87421008
0086-13992809772
Home
About
Products
Motor
Pump
Fan
News
Company News
International Newsletter
Download
Marketing
Contact
Contact Information
Online message
Get Quote
How to Reduce the Damage of Inverter to Motor
Install reactors at the output of the inverter: This measure is the most commonly used, but it should be noted that this method has a certain effect on shorter cables (below 30 meters), but sometimes the effect is not ideal.
30
2023
/
10
Selection of motor voltage and speed
The rated speed of the motor is selected according to the requirements of the production machinery. When determining the rated speed of the motor, the transmission ratio of the mechanical deceleration mechanism must be considered. The two cooperate with each other and can be determined through a comprehensive comparison of technology and economy. Generally, the motor speed is not less than 500r/min, because when the power is constant, the lower the motor speed, the larger its size, the more expensive, and the lower the efficiency. If you choose a high-speed motor, it is bound to increase the mechanical deceleration mechanism The transmission ratio of the machine makes the mechanical transmission part complicated.
Operating characteristics of three-phase asynchronous motors
The working characteristics of three-phase asynchronous motors The working characteristics of asynchronous motors refer to the relationship between the rotation speed N, stator current I1, power factor cosφ1, electromagnetic torque T, efficiency η, etc. of the motor and the output power P2 under the condition of rated voltage and rated frequency operation, I .e. when U1 = UN,f = fN, n, I1, cosφ1, t, n = f(P2). Since the asynchronous motor is an AC motor, it is necessary to consider the power factor for the power grid. At the same time, due to the unilateral excitation, the excitation current and the load current coexist in the stator winding, so the stator current should be paid attention.